How to Remove Mold From Your Shower
Concerned about how to remove mold from your shower? Look no further as the guide details the causes, treatments and prevention of mold growth in your bathroom.
Mold growth in the corners of the bathroom and in the shower is common and can lead to long-term health problems.
However, because these areas remain very humid and warm, they provide an ideal environment for mold growth. However, if you know the right methods, you can remove existing mold and prevent future growth.
Remember, they look gross, but they can also make you sick. For example, mold spores are airborne and can cause health problems, including wheezing, eye or skin irritation, and cold-like symptoms. So it’s important to remove them as soon as you spot new growth.
You can buy commercial cleaning products, but we recommend trying these products first. These methods are very inexpensive and you can find most of the products at home. You may need to experiment a bit to find the way that works best for you, and you don’t need to worry.
4 WAYS TO REMOVE MOLD FROM YOUR SHOWER
We’ve listed four methods in this section, none of which will burn a hole in your pocket. Read on to learn all about them.
1. CLEANING WITH VINEGAR
While it might be tempting to opt for the quickest fix of a store-bought mold remover, opting for a natural remedy like white vinegar can prevent mold from returning.
Vinegar solution is known for mold cleaning and mildew and mildew remediation due to its slightly acidic nature. It is a very gentle ingredient and you can use it on any surface including metal and silver. It is also commonly used to remove stains from clothing.
However, it is better not to use it with bare hands. Instead, wear rubber gloves and grab an old toothbrush or cleaning scrub. Pour the vinegar into a spray bottle, spray it on the desired area, and then let it sit for a while. Then scrub the area thoroughly with the brush and remove any mold growth.
However, if vinegar alone doesn’t work, mix it with dish soap and tea tree oil. Add about 15 drops of oil for every half cup of vinegar. Then mix it with water and apply this solution to the shower area using a spray bottle. Concentrate on mold growth.
Leave for 5-10 minutes before scrubbing and spot cleaning with boiling water. You can spray this mixture on the shower curtains when mold starts to form in the corners.
You can make a more effective solution by mixing vinegar with baking soda or baking soda to create a more effective cleaning liquid. It is perfect for bathroom tiles and patios; You can use this solution anywhere in the house. To make a thick paste, you need to mix vinegar with 3 cups of baking soda.
If the solution is too runny, add more baking soda. Apply with a spray as needed and leave for a while before massaging vigorously. This should remove the mold leaving you with clean tiles and a mold free shower area. Rinse the area well and let it dry overnight so that any remaining moisture cannot promote mold growth.
2. USING HYDROGEN PEROXIDE
You can also use hydrogen peroxide which has anti-mold properties and will help you with the fungus problem. When the peroxide is applied to the mold as a mold release agent, it will begin to bubble and you can easily wipe the area clean. This solution is stronger than vinegar and can be used from the start.
Get some peroxide and a spray bottle. Next, mix 1 part of the remedy with 2 parts of water and pour it into the bottle. Spray on the desired areas and leave for some time. You can wipe or scrub the area with a cleaning sponge. And wash the area with clear water after cleaning is complete.
In this case, we recommend wearing gloves and appropriate clothing, as this agent can cause discoloration and staining of the fabric. This solution will also remove grout on tiles if you’ve recently replaced them. Your bathroom will be thoroughly cleaned and you can repeat this process every few months.
3. CLEANING WITH BORAX
Mold feeds on the organic matter left over from everything you do in the bathroom. If peroxide and vinegar aren’t right for your bathroom, you can try borax. It is a powerful agent with unique properties that removes mold, mildew and all types of dirt and grease from the bathroom.
Mix equal amounts of borax and water, then pour into a spray bottle. Spray the solution on the desired area and leave it on for some time. There is no need to wash or scrub the surface, as the solution will act as a “mold repellent” for a long time.
Keep this solution handy if your bathroom is very prone to mold. Many homeowners often use it as an after-shower spray to clean tile and other surfaces, especially in the bathroom corner area.
4. USING BAKING SODA AND BLEACH
Bleach is a pure disinfectant and has powerful antibacterial and antifungal properties. If vinegar, borax, and hydrogen peroxide don’t work, you can use bleach. It contains powerful active ingredients and is said to eliminate and prevent fungal growth.
However, before using it, make sure you have the correct safety gear, including gloves, mask, respirator, and goggles. Then mix some bleach with two parts water and pour the solution into a spray bottle. Spray on needed areas and wait 10-15 minutes. Afterward, rinse and dry the area well, making sure the bleach has been completely removed.
For stubborn mold, you can try mixing baking soda with bleach. These are two of the most powerful household disinfectants and should be able to kill any fungus growth. Again, don’t forget to put on your safety gear before you start, as the solution gives off strong fumes.
Take 1 cup of bleach powder and mix it with twice the amount of baking soda. It would help if you had a thick paste that you apply to the spots with a brush. Then use plastic sheets to cover the areas.
We recommend waiting a few hours for the paste to dry completely. You can then remove it with a brush or cloth and rinse the area well to remove excess bleach powder.
REMOVING MOLD FROM YOUR SHOWER
We all love a clean bathroom surface, and now you can achieve that. Remember that the toilet must be adequately ventilated while working, as solid chemical vapors are released.
This is especially necessary when working with bleach. In addition, it would be helpful to cover your nose, mouth, hands and eyes with protective gear. Purchase a respirator if necessary and take all safety precautions. If you continue to have trouble removing mold, you can contact a local cleaning service or plumbing company for additional solutions.
That brings us to the end of this guide, and feel free to share your comments, suggestions, and experiences with us in the comments section below. Until next time, take care!
Call Our Experts & Let’s See How We can Help You
Complete this form and we’ll get back to you within 24 hours.
*denotes a required field