Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

No Hot Water Pressure in Your Shower?

Have you turned on your shower and found there is no hot water pressure? We’re here to help you with this guide to why you might be experiencing low water pressure in your shower!

Have you taken a hot, steamy shower after a long day and then found that you don’t have a hot water connection?

Low water pressure can be very problematic, especially when you are in a hurry to take a shower.

Various factors, including a defective or worn mixing valve, can lead to low pressure. However, the main line or hot water system could also have a problem.

Some problems you can solve at home without having to call a professional. However, others may require qualified plumbers to fix the problem. This guide explains the causes of low hot water pressure in your shower and sink faucet.

So read on!

CAUSES BEHIND LOW HOT WATER PRESSURE IN YOUR SHOWER

In this section, we have written about the causes and solutions for each issue.

1. MALFUNCTIONING MIXING VALVE

Some toilets have a single faucet for hot and cold water. A mixing valve is installed in the pipe, which controls the supply of hot and cold water to the shower head. If this valve malfunctions, water flow may be interrupted.

A faulty mixing valve can result in high or low water pressure and will need to be repaired. In general, this valve is difficult to reach, but a plumber can do it.

2. PARTIALLY CLOSED VALVE

Many valves are installed in the plumbing system of the house. Water pressure can drop if one of them is partially closed. This can happen at the main shutoff valve, water meter valve, or in-line valves. Have a plumber check everything and fix any problems that may arise.

3. OLD SHOWER HEADS

An old low flow showerhead is one of the most common reasons for low water pressure. Older models can significantly reduce water pressure, but there is an easy fix. To fix the problem, you can replace an old shower head with a new one.

You can do it at home without needing professional help. However, if the shower hose behind the shower head needs replacing, you will need a licensed plumber.

4. WATER PRESSURE REGULATOR

Although you have doubts about the water heater, the problem could be a faulty water pressure regulator. Most homes have these to regulate the water pressure and keep it within the limit. This is located on the main water supply line in front of the house entrance.

The job of the water pressure regulator is to maintain a safe water pressure range. If your pressure regulator is broken or malfunctioning, the pressure will fluctuate and you will need to hire a professional to fix it.

5. BLOCKED SHOWER HEADS

If you use a shower head for a long time, mineral deposits may have built up inside. This can result in a clogged shower head that disrupts the flow. To remove it, you can use vinegar. Take a bag or bowl and fill it with vinegar. Then detach the shower head and place it in this container overnight.

The next day you can use a brush or tool to remove any debris from the shower head holes. As soon as all spots are free, you can put on the shower head and check the flow.

6. LEAKING PIPES

Metal pipes that have been used for a long time can corrode or leak. This can lead to negative pressure in the shower.

Check the hot water pipes to see if the water is dripping and puddles forming. Once you find the problem, you can have a plumber examine and fix it.

7. PROBLEMS WITH THE WATER HEATER

Last but not least, the water heater should be checked. There may be faults in the system or in the hot water tank that are causing a vacuum. You may also have clogged pipes in your water heater that could be preventing hot water flow.

Have the water heater repaired if you notice only slow water flow or any other problem with the hot water system.

FIXING YOUR WATER PRESSURE ISSUES

A lack of hot water is a plumbing emergency and should be treated as such. To better understand the problem, you can inspect other sink faucets in the same bathroom and check the water pressure. If they work properly, there must be a problem with the heater or the shower hose.

You can also check out other bathroom faucets and sinks. There may even be a problem with the main water line that goes into the bathroom where the shower is located.

If you don’t have expertise, hire a plumber to do the job to avoid further problems. Speak to our team at Heartland Plumbing in Magnolia, Texas if you would like to discuss your plumbing needs. With our wide range of plumbing services, we solve your water pressure problems in no time.

We recommend that you do not ignore low water pressure, as unresolved issues can lead to more plumbing problems in the future.

We’ll get back to you within 24 hours

Call Our Experts & Let’s See How We can Help You

Complete this form and we’ll get back to you within 24 hours.

*denotes a required field

Request Free Quote